Found these pics yesterday of a fellow in the States who just lowered his PT all round so it sits a little more level than it was but boy he certainly went all the way. And no it isn't an air suspension.
Somehow I think he needs to make a bit of an adjustment with his exhaust system.

hope his got a good panelbeater and spraypainter for the scrapes OUCH

The exhaust is sitting on the ground so he definately isnt driving it like that.
More like a mistake....woops wrong springs.

- Ray

Hydrolics maybe deffinately not driveable like that
Unless its a toy photo'd to like like a real one

it would be allright he most proberbly drives with his left wheels up on the kerb. besides it would make easir to wash the rool .raym

Found out that he has actually altered the exhaust since these pics were taken but pic hasn't been photoshopped as there is another fellow who has done the same. Must be a comp to see how low they can go between these two fellows.
Don't have pics of the 2nd one yet.

pics posted looks like the car is in its "sitting" position, handbrake up.
Here's my ride sitting next to PERONI at the Dandenong Plaza.

Adjustment, no worries, just drive it around a few car parks that will fix it up, either grind the exhaust down so that it wont scrap any more or it will just rip it off, either way that problem would be solved, shame about the body work that would need to be done as well.

Found a pic of the other PT but he has lowered it further since this pic was sent to me.



Somehow I think these fella's go tooo low and I also believe this one now has an air suspension put on it in the past 12 months.
I'll try to find out for sure.

All work must get a engineering certificate and must be self leveling to be road worthy in Victoria.
Chief, are you sure the car pictured drives around like that? Looks to me it is at its sitting position.. once the car is taken out of park it will rise to ride height,,
Had my car done at DWCustoms.. but they are no longer there.. but they referred me to
www.airide.com.au
2/19 Jersey Rd, Bayswater, Australia 3153
03 9729 5556
or if you have a face book
www.facebook.com/pages/Air-Ride-Suspensi...471146531035?sk=wall
The owner Graeme has been doing this for more then 20+ years.. he supplies 90% of Air Bag kits/systems in Australia. Does alot of old chevs etc.

kr33p3r both these cars are in the States so who knows what the rules and regulations are over there.
Certainly different to our certifications over here

Yeah I know there in the states,, www.ptcruiserlinks.com/forum/exterior-ac...lambo-door-kits.html
I knew I had seen that car before,,, CANDYMAN

we have been using air kits since 1998on cars .. longer on commercials... but not on the PTs .. !!

kr33p3r wrote:
Yeah I know there in the states,, www.ptcruiserlinks.com/forum/exterior-ac...lambo-door-kits.html
I knew I had seen that car before,,, CANDYMAN

Spot on there my friend.
He has a very good site also and is very good with his advice, excellent in fact.