Hi Guys,

Can anyone give us some advice on easiest way to remove side indicators as we have bought some white ones which we would like to fit.

Floss

remove the screws from inner wheel arch panel lift back and remove filter original side blinker unclipes andcomes out just cut wiries and connect new blinker . repeat for other side

I don’t think you actually have to remove the inner guard. I thought I remembered being able to slid them backwards towards the door and they popped out. It was a hard push but, maybe that’s why you were supposed to go from inside?

I done mine from the outside,but Its probably easier to do it from the inside as they dont have very long wires.

watched phantom do mine from outside ....... they did some how click / slide out used a scfew drive with foam to push the clip thing as he slid it ??? .... didn't have same plug on new ones so he soldered and re sealed with insulation tape etc .... mine have had to be reglued with the cold weather and being ouside all the time .. one has a little moisture in it ... but still work and look great!!

Thanks guys for the tips. I'll pass them on to Tim and he can take his pic.

Floss