|
B pillar Surfaces 6 Years, 10 Months ago
|
|
|
Hi All
Quick question.
My B Pillar black surfaces are getting a blue like streaky finish on them any idea on how to clean it. It has been happening since water restrictions started and I have been washing the car at car lovers like places.
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re: B pillar Surfaces 6 Years, 10 Months ago
|
|
|
Grant, car lovers is your first mistake, 2ndly straight kero will fix it, regards
|
|
Murf (User)
Just cruising
Posts: 580
|
|
MURF |
The administrator has disabled public write access.
|
|
|
|
Re: B pillar Surfaces 6 Years, 10 Months ago
|
|
|
Hi murf
Thanks for the tip to remove it, it wasn't car lovers exactly but a servo with one of those wash yourself bays. It was good when it was new but now it is a few months old I have noticed residue after every wash. I told the owner and he said next wash would be reduced but I have not been back and am not keen to do it again.
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re: B pillar Surfaces 6 Years, 10 Months ago
|
|
|
It's just a recycled water thing. Car wax works well keeping the markings at bay. Or get them cleaned under warranty. There is a TSB released back in 2001 for this problem and if it can't be cleaned then they should be replaced.
|
|
Wendy (User)
Can't find the brake
Posts: 2352
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re: B pillar Surfaces 6 Years, 10 Months ago
|
|
|
G'day guys,
I was going to bring up the same problem Grunt, but found that car polish brings them up fine, after trying a few different things (will give the kero a go next week). I wash mine in the brushless laser wash and thought it might have been a residue from one of the sprays. The rest of the car seems to come up fine, so I wasn't all that concerned once I used the polish on it.
What's the issue with car lovers? I find these places convenient with the water restrictions in place, but keen to hear if they are going to hurt my baby in anyway.
|
|
Pete (User)
Running on all cylinders
Posts: 58
|
|
Electric Blue 2004 Ltd.
Mods: Air Ram bonnet, E&G Grill, Xenon Crusher front fascia, 17" Malibus, colour coded brake callipers, couple of other bits here and there- just working my way through the catalogue. |
The administrator has disabled public write access.
|
|
|
|
Re: B pillar Surfaces 6 Years, 10 Months ago
|
|
|
Don't worry about Carlovers Pete. You get the same markings in hard water areas too. Just keep up the polish and if things get too bad, a quick once over with clay bar can help.
|
|
Wendy (User)
Can't find the brake
Posts: 2352
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re: B pillar Surfaces 6 Years, 10 Months ago
|
|
|
Hey congrats on your 1000th post wendy!!! Inspirational
|
|
Pete (User)
Running on all cylinders
Posts: 58
|
|
Electric Blue 2004 Ltd.
Mods: Air Ram bonnet, E&G Grill, Xenon Crusher front fascia, 17" Malibus, colour coded brake callipers, couple of other bits here and there- just working my way through the catalogue. |
The administrator has disabled public write access.
|
|
|
|
Forum
